BFTVN - ALUMINUM ALLOYS
- MSDS: BFTVN
- Manufacturer: INWELD MFG CORP
- Product Name: ALUMINUM ALLOYS
- National Stock Number: 3439-00-885-3638
Product Identification
Product ID:ALUMINUM ALLOYS
MSDS Date:01/01/1987
FSC:3439
NIIN:00-885-3638
MSDS Number: BFTVN
Responsible Party
Emergency Phone: (203)661-8340
Cage: 66376
Contractor
Telephone: 610-261-1900
Cage: 66376
Ingredients
ALUMINUM (SARA III)
CAS: 7429-90-5
RTECS: BD0330000
Fraction By Weight: 93.4%
OSHA PEL 15MG/M3 DUST/5 FUME
ACGIH TLV: 10MG/M3 DUST; 9192
MAGNESIUM
CAS: 7439-95-4
RTECS: OM2100000
Fraction By Weight: 5.0%
SILICON,CAS#7440-21-3
RTECS: VM0400000
Fraction By Weight: 0.5%
ACGIH TLV: 10MG/CUM(DUST)
IRON OXIDE
CAS: 1309-37-1
RTECS: NO7400000
Fraction By Weight: 0.4%
OSHA PEL 10 MG/M3 (FE)
ACGIH TLV: 5 MG/M3(FE),B2; 9293
CHROMIUM (SARA III)
CAS: 7440-47-3
RTECS: GB4200000
Fraction By Weight: 0.12%
OSHA PEL 1 MG/M3
ACGIH TLV: 0.5 MG/M3; 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
Effects of Overexposure:EYE:IRR;INH:DIZZ,NAUSEA,DRYNESS,IRR. OF
NOSE,THROAT
First Aid
First Aid:EYE:FLUSH W/COPIOUS AMOUNT OF WATERS;SKIN:WASH WITH SOAP &
WATER;INHALE:REMOVE TO FRESH AIR,GIVE ARTFICIAL RESPIRATION IF
NEEDED;IF ANY CONDITION PERSISTS,SEE DOCTOR.
Fire Fighting
Extinguishing Media:DRY PWDR OR SAND.
Fire Fighting Procedures:DO NOT USE WATER,HALOGEN ON DUST FIRES.
Unusual Fire/Explosion Hazard:DAMP AL DUST MAY SPONTAN HEAT W LIBERATN
OF H*2 TO FORM EXPLOS AIR MIXTURES.
Accidental Release
Spill Release Procedures:CLEAN UP ANY GRINDING DUST OR WASTE RESIDUE
AND PLACE IN SUITABLE DOT APPVD DISPOSAL CONTAINER.
Handling
Other Precautions:HARD ALLOY INGOTS IN THE 2000&7000 SERIES MUST BE
STRESS RELIEVED TO PREVENT EXPLOSION WHEN SAWED.-TRAIN WELDER TO
KEEP HIS HEAD OUT OF THE FUMES-MONITOR AIR TO ENSURE ACCEPT
EXPOSURE.
Exposure Controls
Respiratory Protection:FUME RESP OR AIR SUPPLIED RESP IN CONFINED
SPACES.
Ventilation:LOCAL EXHAUST TO MAINTN BELOW TLV.
Protective Gloves:WELDER'S GLOVES
Eye Protection:FACE SHLD W FILTER LENS.
Other Protective Equipment:SUBSTANTIAL DK CLOTH,ARM
PROTECT,APRON,HAT,SHOULDR PROTECT.
Supplemental Safety and Health
MSDS DATED 06-01-85/OTHER INGRED:TI 0.13%;MN 0.125%;CU 0.10%;ZN
0.10%;OTHERS 0.15%/
Chemical Properties
HCC:N1
Spec Gravity:2.7
Solubility in Water:NEGLIGIBLE
Appearance and Odor:METALLIC APPEARANCE.NO ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRG OXID,HALOGN AC,SOD.HYDROX,BROMAT IODAT,AMM.NITR,ANH BR.
Stability Condition to Avoid:MOISTURE
Hazardous Decomposition
Products:H*2,CO,CO*2,O*3,NITROGNOXIDES,INFRARED&ULTRAVIOLET
RADIATION
Disposal
Waste Disposal Methods:DISPOSE OF IAW LOCAL,STATE,FED REGS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.